The ShowerBoss® Timer is programed by you for the number of minutes of water flow, and the number of minutes for waiting before another shower can be started.

Once installed on the wall, the settings cannot be changed by the user. (see instructions for re-programming)

The solenoid valve is 'normally closed' and needs to have the 'Start' button pressed each time to begin another shower.

There is no change to the water temperature or pressure from our units.

If the hot and cold water are left on at the end of the Waiting time, you still need to press the 'Start' button again to get the water to flow.

The Installation Instructions for each unit are on their respective pages on our website for your review.

Once the Start button is pressed the full cycle must be completed before another shower can be started. (The water flow does not control the program)

The digital display* counts down the minutes along with an audible sound to keep the user aware of the time remaining for their shower.

*(Battery units have different color LEDs and sound for time remaining)